TEN 50-4815

DC/DC Converter TEN 50 Series, 50 Watt • Highest power density: 50 W in 1” x 2” x 0.4” package • • Excellent efficiency up to 92 % • • • • Output voltage adjustable Operating temperature range –40°C to +85°C UL 62368-1 IEC 62368-1 Remote On/Off I/O isolation 1500 VDC 3-year product warranty The TEN 50 Series is a range of isolated high performance DC/DC converter modules. Due to the very high efficiency of up to 92% and the use of highest reliable components these 50 W converters come with a footprint of only 1.0” x 2.0”. The 12 models have a wide 2:1 input voltage range and a tight output voltage regulation. They do not need a minimum load and a offer a high efficiency also at low load conditions. The output voltage is adjustable by external resistor. Remote On/Off and protection against overload and short circuit are standard features of these converters. Typical applications are in mobile equipment, instrumentation, distributed power architectures in communication and industrial electronics and everywhere where space on the PCB is critical. Models Order Code Input Voltage Output Voltage Output Current Efficiency Range nom. (adjustable) max. typ. TEN 50-1210 3.3 VDC (2.97 - 3.63 VDC) 10'000 mA 89 % TEN 50-1211 5 VDC (4.5 - 5.5 VDC) 10'000 mA 90 % 12 VDC (10.8 - 13.2 VDC) 4'170 mA 91 % 15 VDC (13.5 - 16.5 VDC) 3'330 mA 91 % 9 - 18 VDC (12 VDC nom.) TEN 50-1212 TEN 50-1213 TEN 50-1215 24 VDC (21.6 - 28.8 VDC) 2'080 mA 91 % TEN 50-2410 3.3 VDC (2.97 - 3.63 VDC) 10'000 mA 89 % TEN 50-2411 18 - 36 VDC (24 VDC nom.) TEN 50-2412 5 VDC (4.5 - 5.5 VDC) 10'000 mA 92 % 12 VDC (10.8 - 13.2 VDC) 4'170 mA 92 % 15 VDC (13.5 - 16.5 VDC) 3'330 mA 92 % TEN 50-2415 24 VDC (21.6 - 28.8 VDC) 2'080 mA 91 % TEN 50-4810 3.3 VDC (2.97 - 3.63 VDC) 10'000 mA 89 % TEN 50-4811 5 VDC (4.5 - 5.5 VDC) 10'000 mA 92 % 12 VDC (10.8 - 13.2 VDC) 4'170 mA 92 % 15 VDC (13.5 - 16.5 VDC) 3'330 mA 92 % 24 VDC (21.6 - 28.8 VDC) 2'080 mA 91 % TEN 50-2413 36 - 75 VDC (48 VDC nom.) TEN 50-4812 TEN 50-4813 TEN 50-4815 Options TEN-HS6 - Optional Heat Sink: www.tracopower.com/products/ten-hs6.pdf www.tracopower.com September 20, 2023 Page 1 / 5 TEN 50 Series, 50 Watt Input Specifications Input Current 12 Vin models: 85 mA typ. (3.3 Vout model) 110 mA typ. (5 Vout model) 160 mA typ. (12 Vout model) 160 mA typ. (15 Vout model) 250 mA typ. (24 Vout model) 24 Vin models: 50 mA typ. (3.3 Vout model) 70 mA typ. (5 Vout model) 85 mA typ. (12 Vout model) 85 mA typ. (15 Vout model) 110 mA typ. (24 Vout model) 48 Vin models: 35 mA typ. (3.3 Vout model) 45 mA typ. (5 Vout model) 50 mA typ. (12 Vout model) 50 mA typ. (15 Vout model) 60 mA typ. (24 Vout model) 12 Vin models: 3'090 mA typ. (3.3 Vout model) 4'630 mA typ. (5 Vout model) 4'580 mA typ. (12 Vout model) 4'580 mA typ. (15 Vout model) 4'570 mA typ. (24 Vout model) 24 Vin models: 1'550 mA typ. (3.3 Vout model) 2'260 mA typ. (5 Vout model) 2'260 mA typ. (12 Vout model) 2'260 mA typ. (15 Vout model) 2'290 mA typ. (24 Vout model) 48 Vin models: 770 mA typ. (3.3 Vout model) 1'130 mA typ. (5 Vout model) 1'130 mA typ. (12 Vout model) 1'130 mA typ. (15 Vout model) 1'150 mA typ. (24 Vout model) 12 Vin models: 25 VDC max. (100 ms max.) 24 Vin models: 50 VDC max. (100 ms max.) 48 Vin models: 100 VDC max. (100 ms max.) 12 Vin models: 8.3 VDC typ. 24 Vin models: 16.5 VDC typ. 48 Vin models: 33 VDC typ. 12 Vin models: 50 mAp-p typ. 24 Vin models: 40 mAp-p typ. 48 Vin models: 30 mAp-p typ. 12 Vin models: 10'000 mA (slow blow) 24 Vin models: 5'000 mA (slow blow) 48 Vin models: 2'500 mA (slow blow) (The need of an external fuse has to be assessed in the final application.) Internal LC-Type - At no load - At full load Surge Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter Output Specifications Output Voltage Adjustment Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) –10% to +20% (24 Vout models) ±10% (other single models) (By external trim resistor) See application note: www.tracopower.com/overview/ten50 Output power must not exceed rated power! ±1% max. 0.5% max. 0.5% max. All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 5 TEN 50 Series, 50 Watt Ripple and Noise (20 MHz Bandwidth) 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: Capacitive Load Minimum Load Temperature Coefficient Start-up Time Short Circuit Protection Output Current Limitation Transient Response - Response Deviation - Response Time 100 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 100 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 150 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 150 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 150 mVp-p max. (w/ 1 µF MLCC || 10 µF TC) 25'800 µF max. 17'000 µF max. 2'900 µF max. 1'900 µF max. 750 µF max. Not required ±0.02 %/K max. 30 ms max. (Power On) 30 ms max. (Remote On) Continuous, Automatic recovery 150% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 250 µs typ. (75% to 100% Load Step) Safety Specifications Safety Standards CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten50 PD 3 Not mains connected - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions External filter proposal: EMS Immunity - Electrostatic Discharge Air: Contact: - RF Electromagnetic Field - EFT (Burst) / Surge External filter proposal: - Conducted RF Disturbances EN 55032 class A (with external filter) EN 55032 class B (with external filter) FCC Part 15 class A (with external filter) EN 55032 class A (with external filter) FCC Part 15 class A (with external filter) www.tracopower.com/overview/ten50 EN 55024 (IT Equipment) EN 55035 (Multimedia) EN 61000-4-2, ±8 kV, perf. criteria A EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A www.tracopower.com/overview/ten50 EN 61000-4-6, 10 Vrms, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature 95% max. (non condensing) –40°C to +85°C +105°C max. –50°C to +125°C Depending on model See application note: www.tracopower.com/overview/ten50 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 5 TEN 50 Series, 50 Watt Over Temperature Protection Switch Off Cooling System Remote Control 110°C typ. - Protection Mode - Voltage Controlled Remote - Off Idle Input Current - Remote Pin Input Current Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage Isolation Resistance Isolation Capacitance Reliability Washing Process - Input to Output, 60 s - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Housing Material Base Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Thermal Impedance Natural convection (20 LFM) On: 3.5 to 12 VDC or open circuit Off: 0 to 1.2 VDC or short circuit Refers to 'Remote' and '-Vin' Pin 2.5 mA typ. -0.5 to 0.5 mA 6'000 m max. 285 kHz typ. (PWM) (24 Vout models) 320 kHz typ. (PWM) (other models) Functional Insulation 1'500 VDC 1'800 VDC 1'000 MΩ min. 2'200 pF max. 220'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Alu alloy, black anodized coating Non-conductive FR4 (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2.5 µm min.) Gold (75 - 125 nm), glossy Metal Case PCB Mount THD (Through-Hole Device) 2" x 1" Lead-Free Wave Soldering 260°C / 10 s max. 30 g 12 K/W typ. 10 K/W typ. (with Heat Sink) www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a, 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) 5a2a420b-ee13-4969-bf97-1218c3094530 - Case to Ambient Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten50 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 4 / 5 TEN 50 Series, 50 Watt 2.54 5 3 3.6 (0.14) 1.85 (0.073) (0.400) Bottom view Pinout 25.4 (1.00) (0.400) 10.16 2 (0.400) 4 1 10.16 10.16 5.08 (0.200) 50.8 (2.00) (0.100) Outline Dimensions 6 11.0 (0.43) 5.5 (0.22) 45.72 (1.800) Pin Single 1 +Vin (Vcc) 2 –Vin (GND) 3 Remote On/Off 4 +Vout 5 –Vout 6 Trim Ø1.0 (Ø0.04) Dimensions in mm (inch) Tolerances: x.x ±0.25 (x.xx ±0.01) x.xx ±0.13 (x.xxx ±0.005) Pin diameter tolerances: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 5 / 5